We will explain how to register a high-pass terminal from start to finish, which is essential for new purchases of high-pass terminals, before using them. Anyone can easily check the information below
Contents [hide]
1 Reasons to register for high-pass terminal
2 Hi-pass terminal type IR RF method
3 How to register high-pass terminal A to Z
3.1 ▶ What to prepare for high-pass terminal registration
3.2 ▶ How to register high-pass terminal
4 Completion of high-pass terminal registration method
4.1 Share this:
Why Hi-Pass terminal registration is a must
In the case of today’s vehicles, there are many cases where a high-pass terminal is attached. When you pick up a new car, the name of the owner of the vehicle and the vehicle number in which the name of the owner is registered are created. In this process, the Hi-Pass is registered under the name of the person in question, so in this case, you can use it without any problem if you insert only the Hi-Pass card into the Hi-Pass terminal and use it immediately.
However, if you are purchasing a high-pass terminal, it is better to understand it a little differently from the above situation. Basically, when purchasing a Hi-Pass, no action or registration is carried out, so if you only use the Hi-Pass card, it will not be used correctly.
If you insert your card without registering for the high pass terminal, if you pass the high pass toll location, it will not be recognized normally and will eventually be treated as an unpaid toll fee.
Therefore, those who did not purchase a car with the high-pass option when purchasing a vehicle for the first time, or those who purchased a high-pass terminal separately after purchasing a used car model a little older, must register the terminal. 하이패스 단말기 등록
Hi-pass terminal type IR RF method 좋은뉴스
If you are purchasing a high pass, you can purchase two types of high pass. It can be purchased directly by IR (wireless) method and RF (wired) method.
There are various differences between the IR (wireless) method and the RF (wired) method, such as whether there is a wire or not, and the method of receiving radio waves. For those who have purchased before or who need to repurchase, it would be good to take a look at the pros and cons of Hi-Pass IR (wireless) RF (wired) differences in advance.
If you have made a new purchase, or if you have already purchased and know that registration is required, and are about to register for a high-pass terminal, please proceed with the registration while looking at the registration methods below one by one.
How to register high pass terminal A to Z
In order to register the high-pass terminal, several preparations are required. First, next time, please make sure to prepare the materials before proceeding.
▶ Preparations for high-pass terminal registration
PC for terminal registration process
High pass terminal body
USB cable for main body connection
Hi-Pass terminal registration materials
▶ How to register high-pass terminal
In order to register the Hi-Pass terminal, you must go to the highway toll website. Therefore, please go to the website first.
If you can see the following screen, click the [Terminal registration/inquiry] tab to move.
Hi-Pass terminal registration menu
And it will be carried out in 4 steps in the following order.
Run Agent
terminal connection
Vehicle and information input
Finished appointment
Hi-Pass terminal registration process
You have to run the first program you see, but here, first, connect the computer PC and the hi-pass terminal by [USB connection] (in general, if the connection is successful, you will hear a voice telling you to start the hi-pass as if connected from the vehicle)
After connecting, click [Run Agent Program] on the screen below.
If some of you receive the following cautions on your computer PC while the program is running, it is okay to just click the [Run] button to run the program.
Example of security warning window
Next, click the [Check terminal connection] button to check the terminal connection, and check whether the connection is well established.
Check terminal connection
There are some people who do not understand the terminal connection check process or the error message below is active. In this case, the USB cable may be defective.
Terminal connection error message
If you have successfully passed the terminal connection check process, you can now enter [Vehicle Information]. You can enter the vehicle number along with the owner’s name. (For recent vehicles, you can enter the vehicle number in a nationwide state without designating a separate area)
Enter vehicle information
If the input is successful, your actual vehicle will appear as follows.
Check vehicle information
And you have to go through [identity authentication] in the customer information that comes up next. You can proceed with the mobile phone credit card certificate, etc., so please proceed with the one you want and check whether the information has been received.
Identity verification in progress
[Agree to the terms and conditions] is in progress to complete the Hi-Pass terminal registration. You must agree to the required items to proceed, so you agree to the terms and conditions.
Accept the terms and conditions
Now, all the process is complete, and in the process of completion, check [Check Registration Information] such as your vehicle number, vehicle name, etc. If there are no special items, it can be considered that the registration of the Hi-Pass terminal has been completed.
Registration information completed
Completion of high-pass terminal registration method
So far, we have looked at the procedures related to the registration of high-pass terminals.
To summarize, you need to connect the terminal to the PC and register it, and you could proceed without too much difficulty as long as the connection was successful.
Now, it seems that you can use the completed high-pass terminal by inserting the dedicated high-pass card and installing it in the vehicle.
I hope it was helpful and I will finish today’s information sharing. Please drive safely.